Meniu Închide

Characteristics of Allergic Harvest PC

The depth of the substance is 4 mm.

If you would like, you are able to raise the amount of the structure to 6 yards or longer. To do this, it’s sufficient to join a two-meter expansion. When choosing a drawing, look closely at the distance between the arches. This figure must be 65 cm, and which is the most appropriate length for the specified thickness of the material. The diameter of the doors based on the manufacturer’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, then it’s important to pick a place because of the place. If that is done correctly, it is possible to provide yourself with a harvest of fresh veggies for the entire year.

The location for the upcoming greenhouse is marked immediately at the planning of the garden plot. To be able to melt the snow at the place of their greenhouse as soon as possible, the best point on the website will be a slight elevation. Moreover, in such a place will not need to worry about substantial humidity as soil and air inside the building.

Build a polycarbonate greenhouse in an elevated site – means to care for the optimal temperatures indoors.

When it isn’t possible to place a greenhouse in an elevated position, you will have to pour a coating of fine crushed stone around 20 cm and the identical layer of fertile soil to make seedbeds.

Before building a greenhouse in your backyard plot, you should also consider where and how this structure is going to be set up. First, you must gidpostroy.ru choose a place for this. The greenhouse ought to be located in a well-lit area at least a few meters away from homes, barns and other structures.

The best way to install a greenhouse in Line with the sides of the Planet

Be sure to measure the dirt surface – it is best to even remove the surface. This can also eliminate weed seeds. And for simplicity of work, eliminate the soil in an area that is about a meter wider on each side of the rectangle that you desire.

Additionally, it is worth considering using a base. As producers state, today most greenhouses don’t need that, particularly if they (greenhouses) are utilized just in the summer and spring time. However, seasoned anglers still suggest making at least a basic basis from a bar. It’s quite simple – it’s sufficient to connect with each other utilizing metal screws and corners four parts of timber using a cross-section of at least 10 * 10 cm. The dimensions of such a foundation should be equal to the base of the upcoming greenhouse.

Simple bar foundation

You may also produce a strip foundation of concrete. He is more reliable than a bar foundation, but demands more fiscal and labor costs. By the way, the greenhouse, that will be used in the winter, with no and do not do with it at all.

Stages of the creation of a strip foundation: a schematic representation

Many producers advise to set up greenhouse structures without even creating a foundation. Even for this use, they equip the framework with specific T-shaped legs, so the construction was securely fixed. But, as practice shows, it is still essential to construct a base: so and the basis will be more rigorously fixed and the elements of the basis that are in touch with the ground, will be kept much more in its initial state.

The most important thing is to care for the material with specific agents to protect the wood from moisture. The substance is normally installed on concrete blocks that are dug into the ground. To get a six-meter structure, they need 10 pieces: four on either side and one at the middle of the endings.

Before you do the greenhouse itself, you need to pick the ideal spot for it. It has to be an even website, so the framework was located evenly, without distortions. It should be sunny and never obscured by trees or buildings.